This method has mixed reviews therefore generally as a rule of thumb we do not offer bird wire as the most effective solution for the prevention of birds, especially within heavy pressure zones.

However, the main benefit of a post and wire system is that it is virtually invisible when installed at height and viewed from ground level, therefore it is often a favoured option when the visability of bird control needs to be minimal.

The wire option is a proofing device that is normally provided on solid flat surfaces to stop birds perching and roosting. Post and wire systems are suitable for pigeon proofing where daytime perching problems are the issue, such as ledges overlooking a regular feeding site, but should never be used in areas where birds are nesting or roosting overnight. Stainless steel posts are installed along the ledge at approximately 1.5 metre spaces with a small 1mm wire slightly tensioned between to prevent birds from landing.

Where lead flashing occurs or with locations that are unsuitable for drilling we can install stick on posts that are fixed with Avifix silicone adhesive. This system is slightly weaker than the drilled posts so we would only recommend this for light pressure areas.